Selected MPN: Z8F042APB020SG
Development Tool Kit: Z8 Encore! XP F042A (8-Pin) Development Kit (Z8F04A08100KITG)

The Z8 Encore! XP F042A Series (8-Pin) Development Kit is an 8-pin-compatible development tool that provides all of the necessary hardware and software features, including a free full-version ANSI C-Compiler, to get your design to market easily and quickly. It supports the Z8 Encore! XP family of 8-pin microcontrollers that offer 1KB to 4KB of Flash memory.


    Hardware
  • Z8 Encore! XP F042A Series 8-Pin Development Board
  • USB Smart Cable
  • 5VDC Universal Power Supply
  • Z8 Encore! XP Technical Documentation CD-ROM

    Software
  • Zilog Developer Studio II – Z8 Encore! Integrated Development Environment
  • ANSI C-Compiler
  • Sample code
  • Acrobat Reader install program
  • Document browser

The Z8 Encore! XP F042A (8-Pin) Development Kit is RoHS-compliant.


The Z8 Encore! XP F042A (8-Pin) Development Kit

• Buy Now      
Associated Documentation
Doc ID Title Doc Type
PS0228 Z8 Encore! XP F082A Series Product Specification Product Specification (Data Sheet)
PB0136 Z8 Encore! XP F082A Series Product Brief Product Brief
FL0197 Encore! Smart Cable Flyer Flyer
UM0128 eZ8 CPU Core User Manual User Manual
UM0130 Zilog Developer Studio II - Z8 Encore! User Manual User Manual
UM0166 Z8 Encore! XP F042A Series Development Kit User Manual User Manual
UM0181 USB SmartCable User Manual User Manual
UM0187 Z8 Encore! XP F042A Series 8-Pin Development Kit User Manual User Manual
UM0195 Opto-Isolated USB Smart Cable User Manual User Manual
UM0207 Ethernet Smart Cable User Manual User Manual
UM0294 Encore! Smart Cable User Manual User Manual
QS0055 Z8 Encore! XP F042A 8-Pin Development Kit Quick Start Guide Quick Start Guide
 
 
Selected MPN: Z8F042APB020SG
Development Tool Kit: Z8 Encore! XP F042A (28-Pin) Development Kit (Z8F04A28100KITG)

The Z8 Encore! XP F042A Series (28-Pin) Development Kit is a 28-pin-compatible development tool that provides all of the necessary hardware and software features, including a free full-version ANSI C-Compiler, to get your design to market easily and quickly. It supports the Z8 Encore! XP family of microcontrollers that offer 1KB to 4KB of Flash memory.


  • Z8 Encore! XP F042A Series Development Board
  • USB Smart Cable
  • 5VDC Universal Power Supply

 

 

Software

  • Zilog Developer Studio II – Z8 Encore! Integrated Development Environment
  • ANSI C-Compiler
  • Sample code
  • Acrobat Reader install program
  • Document browser

The Z8 Encore! XP F042A (28-Pin) Development Kit is RoHS-compliant.

The Z8 Encore! XP F042A (28-Pin) Development Kit

• Buy Now      
Associated Documentation
Doc ID Title Doc Type
PS0228 Z8 Encore! XP F082A Series Product Specification Product Specification (Data Sheet)
PB0136 Z8 Encore! XP F082A Series Product Brief Product Brief
FL0197 Encore! Smart Cable Flyer Flyer
UM0128 eZ8 CPU Core User Manual User Manual
UM0130 Zilog Developer Studio II - Z8 Encore! User Manual User Manual
UM0166 Z8 Encore! XP F042A Series Development Kit User Manual User Manual
UM0181 USB SmartCable User Manual User Manual
UM0187 Z8 Encore! XP F042A Series 8-Pin Development Kit User Manual User Manual
UM0195 Opto-Isolated USB Smart Cable User Manual User Manual
UM0207 Ethernet Smart Cable User Manual User Manual
UM0294 Encore! Smart Cable User Manual User Manual
QS0043 Z8 Encore! XP/Z8 Encore! Development Kits Quick Start Guide Quick Start Guide
QS0055 Z8 Encore! XP F042A 8-Pin Development Kit Quick Start Guide Quick Start Guide
 
 
Selected MPN: Z8F042APB020SG
Development Tool Kit: Encore! Smart Cable (ZUSBESC0200ZACG)

Zilog’s Encore! Smart Cable (ZUSBESC0200ZACG) is used to download program and debug systems based on Z8Encore! and Z8 Encore! XP microcontrollers using the Z8Encore! Zilog Developer Studio(ZDS) II version 5.6.2 (and later releases).


Features
  • Supports target system clock frequencies between 4kHz and 24MHz at OCD baud rates of up to 500kbps.
  • Provides up to 100mA of current to target systems before an external power source is required.
    • Target operating voltage can be configured in steps of 100mV between 1.8V and 3.6V.
  • Measures target current consumption (up to 30mA) under control of the ZDSII IDE to provide a numerical result on demand, or a graphical output of measurements at 1ms (or longer) intervals.
    • Optional breakpoint can be enabled to trigger once the target current consumptions goes above, or below, a configurable threshold.
  • Allows target application block OCD communications while in stop mode or performing critical operation. This can be accomplished via RESET- pin or new signalling pin named T_MSG, based on project configuration.
    • This feature can be used to enable debugging Encore! targets as they transition through stop mode without causing a power-on-reset event(1).

For more information regarding these features, refer to the ZDSII Help file integrated with the ZDSII Encore! 5.6.0 (and later) IDE.
(1) Requires the application to drive the appropriate signalling pin (T_MSG or RESET-) low prior to entering stop mode. During the SMR the signalling pin should be driven high, (if using T_MSG), or configured as the reset alternate function, driven high, (if using RESET-).


Kit Contents

  • Encore! Smart Cable, part number ZUSBESC0200ZACG
  • Six-conductor flat cable
  • USB-A to mini-B cable
  • Encore! Smart Cable Flyer (FL0197)

Software

  • Z8Encore! Zilog Developer Studio II version 5.6.2 or later.


Zilog's Encore! Smart Cable is RoHS-compliant.




• Buy Now      
Associated Documentation
Doc ID Title Doc Type
FL0197 Encore! Smart Cable Flyer Flyer
UM0294 Encore! Smart Cable User Manual User Manual
 
 
Selected MPN: Z8F042APB020SG
Development Tool Kit: Zilog Standalone Programmer (ZUSBZSP0100ZACG)

The Zilog Standalone Programmer (ZSP) USB dongle is used for production programming or field-updating an application in Flash memory on Zilog’s S3 and Z8 Encore family of microcontrollers. Target Programming can be performed manually at the touch of a button on the ZSP, or automatically by an external programmer through the ZSP external controller interface.

 

The Target firmware is pre-loaded into the Zilog Standalone Programmer (ZSP) from a PC via USB using the ZSP configuration program.

 

 

Features:

 

  • Supports all Zilog Z8 Encore and S3 MCU’s
  • Stand-alone operation
    • No need for PC once the hex file is loaded and the unit is configured
  • Simple, single button operation
  • Serialization with auto increment/decrement
  • Password protection
  • Programming Count Limit
  • Supports automated programming with External Controller Interface (ECI)

 

 

Kit Contents

 

The ZIlog Standalone Programmer Kit PN: ZUSBZSP0100ZACG contains the following items:

 

Item Description Quantity
1 Zilog Standalone Programmer (ZSP) 1
2 Type-A(male) to Mini-B(male) USB cable 1
3 10-wire ribbon cable 1
4 Zilog Standalone Programmer Kit hardcopy insert (FL0191) 1

 

* Zilog Standalone Programmer is RoHS-compliant.

 

Optional Hardware

 

The ZSP can be powered by a PC with USB port or wall power supply capable of supplying 5V at 200mA. Using a USB wall adapter allows the ZSP to program targets in standalone mode.
 

 

Software

 

Download the latest version of the following free software:

Zilog Standalone Programmer Configuration Software

Zilog Standalone Programmer

• Buy Now      
Associated Documentation
Doc ID Title Doc Type
UM0287 Zilog Standalone Programmer User Manual
UM0293 Zilog Standalone Programmer Configuration Software User Manual
 
 
Parts
Part NumberPackageStatus
Part NumberPackageStatus
The Sample Center is managed separately
from Zilog's Customer Support services,
and therefore requires a separate login.
Acknowledged! Take me to the Sample Center.
Disable this pop-up in the future.