Featured Products

Overview


The Z8F1624 MCU is a member of Zilog’s F3224 Series, the latest addition to the Z8 Encore! XP® product line. This device, like the entire F3224 Series, is based on Zilog’s advanced 8-bit eZ8 CPU core and is optimized for low-power and wireless applications. It supports 1.8V to 3.6V low-voltage operation with extremely low Active, Halt and Stop Mode currents, and offers an assortment of speed and low-power options.


Potential Applications

The feature-rich analog and digital peripherals of the F3224 Series makes it suitable for a variety of applications, including:


  • Safety and security
  • Utility metering
  • Digital power supervisory
  • Hand-held electronics
  • Sensing
  • Motion detection
  • General motor control

Build your application with the F3224 Series Development Kit (Z8F32240100ZCOG).


The F3224 Series MCUs are RoHS-compliant.


Z8F1624 Features
  • 20 MHz eZ8 CPU core
  • 16 KB Flash memory with in-circuit programming capability
  • 3.75 KB internal register RAM
  • 12-bit Analog-to-Digital Converter (ADC) up to 15 channels
  • Two on-chip analog comparators
  • Two on-chip, low-power operational amplifiers
  • 8 Channel Event System provides communication between peripherals for autonomous triggering
  • Full-duplex 9-bit UART port with LIN/DALI/DMX support
  • On-chip temperature sensor
  • Enhanced Serial Peripheral Interface (SPI) controller
  • 20- 32-, and 44-pin packages
  • On-Chip Debugger (OCD)
  • Internal clock sources and clock multiplication including: IPO, DCO, WTO and (IPO), Digitally Controlled Oscillator (DCO), Watchdog Timer Oscillator (WTO) and Frequency Locked Loop (FLL)
  • Low Frequency Crystal Oscillator (LFXO) operating at 32.768 kHz with low power consumption
  • Built-in Low-Voltage Detection (LVD) with programmable voltage threshold
  • Power-On Reset (POR) and Voltage Brown-Out (VBO) protection
  • Up to 30 interrupt sources with up to 23 interrupt vectors
  • 14 to 36 General-Purpose Input/Output (GPIO) pins, depending upon package
  • Watchdog Timer
  • 16-bit Multi-Channel Timer which supports four Capture/Compare/PWM modules(on 32 and 44-pin packages
  • One additional basic 16-bit timer with interrupt (shared as UART Baud Rate Genera-tor)
  • Three enhanced 16-bit timers with Capture, Compare, and PWM capability
  • One 16-bit timer with 3 functional modes
  • I2C controller which supports Master/Slave modes
The Z8F3224 Series Block Diagram

Click to enlarge
The Sample Center is managed separately
from Zilog's Customer Support services,
and therefore requires a separate login.
Acknowledged! Take me to the Sample Center.
Disable this pop-up in the future.