ZiLOG Nexus SDK 1.0 (Build 06062402) ============================================================================== Some of the documentation supplied with this product requires that Acrobat Reader or equivalent be installed on the host machine. Acrobat Reader is available free on the Adobe website at www.adobe.com. Contact Information -------------------------------------------------------------------------- ZiLOG Inc. Web Site: http://www.zilog.com Technical Support Channel: http://support.zilog.com Table of Contents -------------------------------------------------------------------------- - Compatibility - System Requirements - Precautions and Limitations - Closed Change Requests - Open Change Requests COMPATIBILITY ============================================================================== Devices -------------------------------------------------------------------------- eZ80Acclaim! MCU: eZ80F91, eZ80F92, eZ80F93 eZ80 MPU: eZ80L92, eZ80190 Z8 Encore! XP 4K: Z8F04xA, Z8F02xA, Z8F01xA Z8 Encore! XP 4K 8-pin*: Z8F04xAXB, Z8F02xAXB, Z8F01xAXB Z8 Encore! XP F08xA: Z8F081A, Z8F082A Z8 Encore! XP F08xA 8-pin*: Z8F082AXB, Z8F081AXB Z8 Encore! XP F0830: Z8F013x, Z8F023x, Z8F043x, Z8F083x, Z8F123x Z8 Encore! XP F1680: Z8F0880xx, Z8F0881xx, Z8F1680xx, Z8F1681xx, Z8F2480xx, Z8F2481xx Z8 Encore! 4K: Z8F04x3, Z8F02x3, Z8F01x3 Z8 Encore! 4K 8-pin*: Z8F04x3XB, Z8F02x3XB, Z8F01x3XB Z8 Encore! F0823: Z8F0813, Z8F0823 Z8 Encore! F0823 8-pin*: Z8F0823XB, Z8F0813XB Z8 Encore! 8K: Z8F08x, Z8F04x Z8 Encore! 64K: Z8F642x, Z8F482x, Z8F322x, Z8F242x, Z8F162x Z8 Encore! 640: Z8F640x, Z8F480x, Z8F320x, Z8F240x, Z8F160x Z8 Encore! MC**: Z8FMC16100 ZNEO Z16F Series***: Z16F2810xx, Z16F2811xx, Z16F3211xx, Z16F6411xx * Requires USB SmartCable ** Requires Opto-Isolated USB SmartCable *** Requires USB SmartCable version 1.4 or later In-Circuit Debuggers/Programmers -------------------------------------------------------------------------- USB SmartCable, version 1.0 or later **: ~ Supports target frequencies from 32KHz to 20MHz ~ Supports target voltages from 2.7V to 3.6V ~ Requires 2mA from the target Opto-Isolated USB SmartCable, version 1.3 **: ~ Supports target frequencies from 32KHz to 20MHz ~ Supports target voltages from 2.7V to 3.6V ~ Requires 2mA from the target Ethernet Smart Cable, version 1.0 or later: ~ Supports target frequencies from 5MHz to 50MHz ~ Supports target voltages from 3.0V to 3.6V ~ Requires 2mA from the target Serial Smart Cable for eZ80Acclaim!, version 1.0 or later: (bootloader, v1.0 or later) ~ Supports target frequencies from 5MHz to 50MHz ~ Supports target voltages from 3.0V to 3.6V ~ Target current consumption is about 170mA (should not exceed 300mA) Serial Smart Cable for Z8 Encore!, version 6.04.03 or later: ~ Supports target frequencies from 153.6KHz to 20MHz ~ Supports target voltages from 3.0V to 3.6V ~ Requires 35mA at 3.3V from the target ZPAK II (Ethernet), version 1.6 or later: (bootloader, v1.30 or later) ~ Supports target frequencies from 5MHz to 50MHz ~ Supports target voltages from 3.0V to 3.6V ** USB device drivers and installation instructions can be found in the distribution at \Driver Drivers\USB\ SYSYSTEM REQUIREMENTS ============================================================================== Supported Operating Systems -------------------------------------------------------------------------- Windows XP Professional SP1, Windows 2000 SP4, Windows 98 SE, Windows NT 4.0 SP6 Development Environments -------------------------------------------------------------------------- Nexus SDK has been tested work work with the following: ~ Microsoft Visual Studio C++ 6.0 ~ Microsoft Visual Studio .NET C++ 2003 USB SmartCable -------------------------------------------------------------------------- Hi-Speed USB (Fully compatible with Original USB) Root (direct) or self-powered hub connection *The USB SmartCable is a high power USB device *Windows NT is not supported Opto-Isolated USB SmartCable -------------------------------------------------------------------------- Hi-Speed USB (Fully compatible with Original USB) Root (direct) or self-powered hub connection *The USB SmartCable is a high power USB device *Windows NT is not supported Ethernet Smart Cable -------------------------------------------------------------------------- Ethernet 10Base-T compatible connection Serial Smartcable for Z8 Encore! and eZ80Acclaim! -------------------------------------------------------------------------- RS232 Communication port with hardware flow and modem control signals *Some USB to RS232 devices are not compatible because they lack the necessary hardware signals and/or they use proprietary auto-sensing mechanisms which prevent the SmartCable from connecting. ZPAK II -------------------------------------------------------------------------- Ethernet 10Base-T compatible connection RS232 Communication port PRECAUTIONS AND LIMITATIONS ============================================================================== 1. This release of the Nexus SDK provides the necessary components to enable the communication with ZiLOG hardware by non-ZiLOG software. The ability to produce custom Nexus DLLs based on the ZiLOG Nexus API is not supported. 2. The set of parts supported by the NexusCLI sample may be a subset of those supported by the SDK. 3. Some portions of the Nexus API that are specific to Emulator functionality (trace, complex events, etc.) may not be supported or implemented. 4. The process of search for available Ethernet Smart Cables opens a UDP port to and should be allowed to do so through an active firewall that stands between the host application (using the ZiLOG Nexus SDK) and the Ethernet Smart Cable. The firewall may be disabled or configured to grant ZDS the right to open a local UDP port. The local port number is assigned by the host and the foreign port number is 3000. 5. The USB and Ethernet Smart Cables will hold the reset line low if it detects a target power loss. CLOSED CHANGE REQUESTS ============================================================================== (none) OPEN CHANGE REQUESTS ============================================================================== (none)